So, through the summer months, I continued to develop and build on ideas as the arena was being reworked. I felt that the ship needed to give the futuristic feel in the same way that the arena did. Working from references and feedback from the group, I had came up with this:
I still wasn't happy with the outcome and it didn't seem to fit in with the rest of the scene. I had attempted to make a rotationally mechanism for the jets, but the jets just didn't seem to go with the ship any longer. I had created landing gear for the ship with hydraulics to give the impression of futurism. My references for it was a tutorial I saw on digital tutors on a futuristic ship they were doing of their own. I had watched it to gain a better understanding of the mechanism.
I developed the weapon housing further and added a missile to the guns along with bolts to the wings so that the engineering of the ship would make sense. I got the idea for the missile from the earlier photo manipulation concept I did in photoshop from the photos I took at the RAF museum. I think it fits in with the restive the ship appropriately.
Being not totally satisfied with the outcome and taking suggestions form the rest of my group, I continued with the ship to get a better look. I ended up with the following:
So I added a few intricate details to the ship and a bit more shape to make it less boxy and for it to have more of a natural flowing line to it. I went back to my RAF Museum photos, blogged earlier on, and decided to incorporate the back end of a helicopter I had taken a photo of. I thought the ship was taking its place within the scene a lot more now but still decided to make some final adjustments to it for it to have its final look and feel. I again referred back to the photos I had taken and this is the outcome:
After all of my development, this is my final ship that I had come up with. I decided to chuck the Jets as it just didn't seem to fit into the ship any longer and after going through some more of my photos and looking at Deviant Art, I decided to add propellers at the top of the ship to create a Heli-Ship. before embarking on this design, I had done a rough sketch outlining my idea as I knew exactly what I wanted it to look like. I had added some shape to the wing as when they were straight, it didn't seem streamlined at all and just came across very boxy and un-natural. I had added guns to the nose of the ship adding detail overall and two on the back with a dome camera as before the area seemed quite empty. added a back door with hydraulics and I rounded off the top panel of the body which before was squared off. Finally I added panels on the weapon housing and smoothed the whole ship to give it a cleaner look.
I researched how propeller wings actually worked so that when I built them, it made sense and so they would work appropriately when it came to animating them also. The link which I looked at is below:
http://www.explainthatstuff.com/helicopter.html
https://www.youtube.com/watch?v=rJb1EZtnzFk
Below is also some references I was looking at when deciding the overall look of the ship:
I also took into account what Mantas had sent me which was a preliminary idea for the tail of the ship. I took this on board also.
Friday, 28 August 2015
Animatic development - Ahmed Bhutta
So after having received feedback from the presentation crit, I had reworked the animatic and developed it further before handing it over to Mantas to get the final animatic for us. I tried to feed off of the advice given which was to show less of the whole scene and some more close ups as it is a quite intense monologue and the close ups give a stronger and more emotional feel to the story. Below are just some of the animatics I had come up with. Please click the links:
Animatic Development 1: https://youtu.be/p2M6P8r6Co8
Animatic Development 2: https://youtu.be/KzLI1p9nXQI
Final Animatic Development: https://youtu.be/lYBdc9f1RlQ
These were developed and built off the storyboarding I had done, before I finally passed it onto Mantas to have a final look and finalise the animatic for our story telling direction.
Animatic Development 1: https://youtu.be/p2M6P8r6Co8
Animatic Development 2: https://youtu.be/KzLI1p9nXQI
Final Animatic Development: https://youtu.be/lYBdc9f1RlQ
These were developed and built off the storyboarding I had done, before I finally passed it onto Mantas to have a final look and finalise the animatic for our story telling direction.
Animations, Rendering, Compositing and Editing in Adobe premier - Mantas Karciauskas
Animations:
Characters
Animating three characters with interactions on my own was very challenging, I struggled for the most part to create a very slow paced movements without having everything look slow motion like. Thus already this being a huge task and working on my own I looked for ways to cut down on the Animation; setting up pathways was one of them and looping the three different walk cycle animations. Each individual characters has their own way of walking and I thought that this was vital for the film in order to achieve a dynamic feel.
I wanted the main character to have facial animations, as we were having lots of mid-close up shots due to the monologue being so personal and there is no better way to depict what the character is going through than by the expressions on his face. For the characters facial expressions I used morphs, eyes and eyelids were animated too.
Camera
I also animated all the camera shots and movements of the camera. I found it to be fairly difficult especially with the tracking shots, as characters walked they also had up and down movement, which had to be implemented into the camera animation, as otherwise the focus of the shot would have been lost.
Rendering:
When rendering you always want to keep the render times to its lowers without compromising too much of a quality lost. I worked on the render settings and optimizing the scene. Rendering times started at four minutes per frame and I knew that this was too much, so I started messing around with Mental Ray materials, Deleting all the unwanted history, any meshes that will not be in the scene, running render diagnostics for errors and playing around with mental ray settings and decreasing screen resolution to 1440x612 which is 25% lower than 1920x816 which is used for the wide screen. Rendering already cropped out frame meant that some work will need to be carried out in Adobe Premiere.
For the most part the actual rendering took place at University, with I and Ahmed being present to set up all the computers and monitor the machines in case it was to crash.
Compositing and Editing in Adobe Premiere
Once everything was rendered, I
Characters
Animating three characters with interactions on my own was very challenging, I struggled for the most part to create a very slow paced movements without having everything look slow motion like. Thus already this being a huge task and working on my own I looked for ways to cut down on the Animation; setting up pathways was one of them and looping the three different walk cycle animations. Each individual characters has their own way of walking and I thought that this was vital for the film in order to achieve a dynamic feel.
I wanted the main character to have facial animations, as we were having lots of mid-close up shots due to the monologue being so personal and there is no better way to depict what the character is going through than by the expressions on his face. For the characters facial expressions I used morphs, eyes and eyelids were animated too.
Camera
I also animated all the camera shots and movements of the camera. I found it to be fairly difficult especially with the tracking shots, as characters walked they also had up and down movement, which had to be implemented into the camera animation, as otherwise the focus of the shot would have been lost.
Rendering:
When rendering you always want to keep the render times to its lowers without compromising too much of a quality lost. I worked on the render settings and optimizing the scene. Rendering times started at four minutes per frame and I knew that this was too much, so I started messing around with Mental Ray materials, Deleting all the unwanted history, any meshes that will not be in the scene, running render diagnostics for errors and playing around with mental ray settings and decreasing screen resolution to 1440x612 which is 25% lower than 1920x816 which is used for the wide screen. Rendering already cropped out frame meant that some work will need to be carried out in Adobe Premiere.
For the most part the actual rendering took place at University, with I and Ahmed being present to set up all the computers and monitor the machines in case it was to crash.
Compositing and Editing in Adobe Premiere
Once everything was rendered, I
Texturing - Mantas Karciauskas
Working on the texture scheme for the guard helmets from references of Roman helmets.
Considering that the guards and the captive are sharing the same armor, (guards having helmets and few additional shoulder armors and back pieces) it was still not enough to distinguish between the two, so I figured that sticking to traditional resolutions to solve this problem would have to be the best approach in this case, so I decided to contrast the two by breaking up the Armour color schemes. Thus, black also connotes danger, power, evil and death just to mention a few.Texturing Arena. Arena is the place where power and wealth is expressed and so therefore texturing this was a little of a challenge to say the least. The group had agreed on primary marble material with gold highlights. I kept this concept in my mind whiles texturing. Because this place was huge and overwhelming, so was the texturing, after experimenting on what works and what could be changed or improved, I soon enough came up with my own workflow to accomplish this result; creating mental ray Mia material with diffuse marble texture, applying to the whole of arena, and then creating custom gold material and applying to specific parts of the arena. (In order for the marble texture to work, I had to UV Map the whole of arena)
Lighting the scene/test renders - Mantas Karciauskas
Lighting the scene is a huge task and it could easily be what makes or breaks the visuals. In this case I had to undergo through a lot of changes and tweaking to achieve the final look.
I wanted to have a natural looking scene, with clouds and sun light. In theory this could be achieved in many different ways; having particles for the clouds which would increase render times dramatically, having a sphere with the cloud texture is another option, however it would be very difficult to make it look realistic as the colors of the sky, sun and clouds would not be reflecting up on the objects. So after lots of researching I discovered how to create my own sky box in Maya, which would act as a real physical sky.
http://www.antoniobosi.com/maya-tutorials-mental-ray-3d/maya-tutorial-c/clouds-in-mental-ray-physical-sun-and-sky-maya-tutorial
Here we have a very moody and depressing look, as much as I liked it, I also felt that it looked too washed without the highlights from the sun.
I wanted to add neon lights to break up the materials, however this had to be dropped as the render times more than tripled.
So instead of lights I decided to use Ceramic Mental Ray material.
Subscribe to:
Posts (Atom)






















































